Defenses schedule

Methods of monitoring encrypted traffic in IP networks based on the analysis of digital fingerprints of protocols

The effect of aluminum and chromium doping on the physical characteristics of beta-Ga2O3 single crystals

Wireless optical data transfer systems based on multi-crystal visible light-emitting diodes and infrared lasers with distributed feedback

Mechanisms of nitrogen-containing heterocycles supramolecular assembly and development of photoactive systems based on them

Heat exchange during evaporation of refrigerants in a confined space

Study of thermophysical properties of metal-ceramic sintered friction materials based on copper

Soft output decoding methods for linear block codes

Application of high-Q ceramic resonators in radio-frequency identification systems and microwave sensors

Subwavelength volumetric resonators for the redistribution of the radiofrequency field in high-field magnetic resonance imaging

Optical heating of gold nanoparticles for photothermal therapy and light-mediated drug release

High-contrast tunable photonic structures based on Ge2Sb2Te5 phase change materials

Development of a systematic approach to predicting the quality of wastewater treatment in food production facilities

Multi-Modal Contextual Analysis of Affective Dynamics in Collaborative Groups

Improvement of management of innovation projects of knowledge-intensive organizations

Criteria and success factors of innovative entrepreneurial projects of higher education organizations

Development of ecosystems of Russian universities based on the introduction of digital solutions

Synthesis and physico-chemical properties of magnetically controlled composite materials based on AlOOH and Fe3O4

Improvement of fish semi-finished products technology with the use of secondary raw materials of high nutritional value

Scalable methods for depositing composite films based on CsPbBr3 nanocrystals with high-efficiency photoluminescence

Laser ablation of hybrid materials for the controlled creation of nano-sized light sources and optical sensors

Multimodal soft biometrics in partial facial occlusion conditions

Method for formation of fiber devices based on fiber fuse phenomenon

Development of synbiotic functional ingredient for food products using exopolysaccharides

Study of thermophysical processes in two-dimensional nanomaterials based on bismuth and antimony under the influence of terahertz radiation

Technology for reducing losses of liquefied natural gas during accumulation, storage and transportation

Methods of synthesis of optical systems for in-line analysis in industrial complexes for oil products monitoring

Integrated optical frequency generation devices

Dynamics of photoexcitations in composites based on luminescent carbon nanodots

Theoretical modelling of nanoscale vertical heterostructures with significant spin-related properties

Automation of ultrasonic testing technology for solder joints of heat exchanger elements

Development of preventive functional food product technology using biologically active substances from plants of the Cruciferae family

Asymptotic Estimation of Linear Regression Parameters Under Interval Excitation

Study of the formation of metallic and metalloid structures at the interface between liquid metal (Ga, GaIn) and salt solutions

The physicochemical principles of synthesizing programmable composite actuators and studying their behavior in an alternating magnetic field.

Methodological concepts for predicting consumer properties of food systems

Numerical simulation of electronic and optical properties of cascade and supermultiperiod quantum structures for IR and THz ranges

Peculiarities of microstructure, strengthening and ductility of low-alloyed ultrafine-grained aluminum alloys

Primary transducer of dynamic instrumental indentation device with differential inductance coil

Nanophotonic materials based biosensors for detecting intermolecular interactions and temperature changes

Investigation of the photocatalytic and structural properties of zinc oxide-based composites modified with tin dioxide and iron oxide

Models and methods for ensuring information security in the product traceability system based on distributed ledger technology

Sensorless control algorithms for induction motors based on adaptive observers

Liquid crystal oligomers of complex molecular architecture

Formation of structures of (bio)polyelectrolyte complexes between chitosan and gelatin

Selection and justification of an energy efficient drive for a submersible LNG pump for large-scale storage tanks

Improvement of methods of regulation of volumetric capacity single-rotor screw compressor

Design of adaptive control laws for linear time-varying systems with uncertainties

The operational control method of cutting tool and processed blanks in flexible manufacturing systems conditions

Justicfication of design methods of LNG storage system for inland transport

Thermosensitive hybrid nanostructures based on resonant gold nanoparticles for optical temperature measurement and second harmonic signal intensity modulation

Biomodification of ostrich meat properties and its application in functional food technology

Laser modification of PbSe films optical and electrical properties for gas analysis devices

Biotechnology of the fermented drink based on apple juice enriched with nanocapsules of green tea extract in pectin

Study of the process of obtaining extracts from plant raw materials for the purpose of using them in the production of semi-hard cheeses

Research on multi-coordinate optical-electronic autocollimation systems for measuring motion parameters of objects

The method of estimating the state variables vector for a class of nonlinear time-varying systems under conditions of uncertainties

Development of cooling systems based on lithium bromide absorption refrigeration systems powered by renewable energy sources

Sol-gel synthesis and properties of silver nanoparticles uniform arrays in a zinc oxide film

Improving technology for production of meat and fish sausage products enriched with omega-3 polyunsaturated fatty acids and probiotics

Influence of plasmonic elements on the thermal conductivity and optical properties of photonic nanostructures

Processes of formation by holographic methods of three-dimensional objects of periodic and arbitrary configuration and their characteristics

Scientific and practical aspects of the gelation of curd whey concentrate obtained by nanofiltration when creating a product for nutrition of athletes

Synthesis and physicochemical properties of vertically oriented graphene layers

Methods for assessing and increasing the security of network infrastucture based on access restriction and optimization methods

Laser formation of periodic structures on metal surface for writing security holograms

Post-quantum cryptography methods using generalized (L, G)-codes

Mathematical and software for training and evaluation of recommendation systems based on synthetic data

Methods and algorithms for recognition and classifying surface defects of rolled sheet based on machine learning

Method of laser-induced micro-plasma for development of fiber Mach-Zehnder interferometer and its sensing applications

Methods and algorithms for data-driven identification of physically-based models in forms of differential equations

Methods and algorithms of intellectual analysis of medical texts in Arabic

Methods for choosing machine learning models for artificial intelligence systems in conditions of small samples

Mathematical modeling of physical and chemical processes based on metric graphs

Laser cleaning conservation methodology for corroded surfaces of heritage metal objects

Mathematical software for Visual Recognition of Russian Speech in Assistive Transport Systems

Methods and algorithms of audiovisual recognition of emotional state of typically and atypically developing children

Data-driven management of the effects of collective dynamics in customer-oriented organizational systems

Multi-Label Classification and Named Entity Recognition using Transfer Learning and Noisy Label Training for Low-Resource Languages

Methods for inferring demographic history models

Assessment and enhancement of predictability for complex nature time series using machine learning methods

Wireless power trasnfer based on novel physical concepts

Transforming Fields of Point Sources and Plane Waves with Electromagnetic Metasurfaces

Models and methods of using blockchain technology in corporate and industrial networks based on cloud and fog computing

Research of optical-electronic gamma radiation converter

Diagnostic system for pathogen-caused Helicobacter Pylori gastrointestinal diseases

Adaptive observers for nonlinear systems based on dynamic extension and mixing method

Design of adaptive state observers with improved convergence accuracy in case of the presence of disturbances in the measurements of the output signal

Machine Learning Methods for End-to-End Automatic Speech Recognition Systems

Random number generators based on low-dimensional semiconductor nanoheterostructures

Analog-to-digital photogrammetric conversion of images of reflection holograms

Robustness of resonant states against parameter variation of dielectric structures

Design of calcium carbonate-based drug delivery systems with morphology control

Development of technological processes for manufacturing of piezoelectric vibration sensors

Development of hydrogel collagen-containing acrylic materials for medical applications

Synthesis and investigation of gelatin-tannin hydrogel materials for medical and biological purposes

Fabrication and study of electrospun polymer nanofibers modified with perovskite nanocrystals

Models, methods and tools for the study of non-stationary workload in elastic systems

Improvement of machinery and equipment scheme for beer production based on small enterprises

Improving the process of modifying potato starch using the principle of a systems approach

Methods for ensuring reliability and energy saving in multi-path software-defined networks

Development of microbial starter culture for bakery products with buckwheat grain flour, untreated hydrothermically

Regimes of optical mode coupling in dielectric resonators

Electromagnetic topological states in arrays of anisotropic scatterers

Synthesis, physicochemical properties, and applications of hybrid carbon materials

Physico-chemical adsorption processes of polyelectrolytes layer-by-layer assembly on carbon surfaces

Technology of functional meat symbiotic pate with Jerusalem artichoke

Methods and algorithms for information retrieval from Arabic texts for filling knowledge bases

Propagating and localized states of electromagnetic waves in wire media

Spatial amplitude-phase modulation of the wavefront with a digital micromirror device in holographic methods

Development of a functional technology food ingredient from the Basidiomycet The Golden cantharelle (Cantharellus cibarius)

Development of a phytocomposition for prolonging the shelf life of fermented milk drinks

Models and methods for ensuring the fault tolerance of business analytics computer systems

Methods and algorithms of biometric identification of the user based on the thermogram of the face

Methods for identifying complex attacks based on intrusion detection systems data

Energy efficient solutions for refrigeration machines using carbon dioxide

Study of mass and energy transfer processes during high-temperature synthesis of multicomponent magnetic and thermoelectric materials

Development of an all-reflective integral field unit for astronomical spectrometers

Research and development of wavefront reconstruction methods by scattering spot for telescope testing

Highly reliable distributed control systems: statistical modeling and optimization methods for design solutions

Optoelectronic properties of single-walled carbon nanotube layers and methods for creating transparent textured electrodes based on them

Photoluminescence and second-harmonic generation of silicon in metal-semiconductor nanosystems

Optical nanoantennas for efficient excitation and absorption of electromagnetic waves

Improvement of signal processing methods of potentiometric multisensor systems for analytical control of liquid media

Electroactive materials based on chitosan and polyvinyl alcohol

Scientific and practical substantiation of the bioconversion of collagen-containing raw materials and evaluation of the effectiveness of the resulting protein components in the production of meat products

Stimulation of innovative activity of high-tech enterprises of the people's Republic of China on the basis of the development of intellectual capital

Technology of a functional food ingredient using polyunsaturated fatty acids and Filipendula ulmaria extract

Development of technology for a synbiotic soft beverage enriched with inulin from sunflower root

Robust Control of Input-Bounded Dynamic Systems with Uncertainties

1047 nm Nd:YLF laser for thomson scattering diagnostics of plasma

Reconstruction methods of optical properties of scattering materials

Research and Development of Hybrid Optoelectronic Structures Based on Halide Perovskite Materials, Polymers and Semiconductor Materials

Development of a technique for acoustic non-destructive testing of residual stresses in special pipes

A method of fabrication, structure, and photocatalytic properties of ZnO nano- and microobjects

Development and investigation of a method for measuring the flow characteristics of a gas-liquid mixture based on the fiber diffraction structures and fiber heating element

Thermal regime of ultracold neutron source for PIK reactor

Improving the methodology for calculating the performance characteristics of a scroll compressor

Variation of structural and optical properties of optically sensitive nano- and microsized crystals via microfluidics

Lead halide perovskite nanocrystals and their composites with enhanced water and air stability

Influence of phase and polarization fluctuations of radiation and optical components parameters on quantum key rate in a fiber-optical continuous variables quantum key distribution system

Control of the rate and intensity of radiative recombination in structures based on halide perovskites

Study of ionic migration in organic-inorganic perovskites for the implementation of solar cells and light-emitting diodes

Composite optical materials based on self-assembled structures for surface enhanced Raman scattering

Optical vortices in circular optical fibers with flexural regular and vortex acoustic modes

Ghost imaging using pseudo-thermal source in broadband terahertz range

Biotechnology of drinks based on goat's milk for people with lactose intolerance

Modification of the physicochemical properties of beta-carotene by methods of supramolecular chemistry

Research and development of plan-apochromatic compact two-channel optical systems with image registration for medical studies

Optical system design for an incoherent tunable color reproduction source using acousto-optical tunable filter

Photonic topological states in arrays of transmon qubits

Turborefrigerating machines efficiency increasing with the centrifugal compressors end type high-head stages

Investigation of the physical foundations of methods for creation A3B5 heterostructures with InGaAsP quantum dots and strain-compensated InGaAs/InAlAs superlattices for near- and mid-IR optical emission sources

Development of a method for automatized synthesis of two and three-lens objectives

Development of virtual reality binocular optical systems with reduced vergence- accommodation conflict using diffraction and refraction elements

Models and methods of reconfiguration and redistribution of flows of multipath fault-tolerant computer networks

Improvement of facilities for volatile organic compounds monitoring in atmospheric air

Photoinduced Phenomena of Arsenic Sulfide Doped in Nanoporous Glass and the Influence of Gold Nanoparticles

Spectral-luminescent, laser and holographic characteristics of chloride and bromide photo-thermo-refractive glasses doped with rare-earth ions

Nonlinear exciton-polariton properties of planar optical cavities based on halide perovskites

Models and methods of using digital signature in trusted data storage systems

Synthesis of nonplanar nanoheterostructures based on III-N semiconductor materials on silicon by molecular beam epitaxy and their properties

Nonwoven materials based on polyvinyl alcohol and chitosan as mangiferin carriers

Modeling of branched peptide molecules with hydrophobic fragments for the delivery of bioactive oligopeptides

Improvements of process and equipment for vegetable oil miscella distillation

Factors for increasing the biological value of cold-pressed olive oil during prolonged storage

Resource-saving technology of non-fat yogurt enriched with encapsulated date seeds bioactive compounds

Formation of innovative ecosystem as a prospective direction of innovative activity of economic entities

Local laser modification of physico-chemical properties of composite thin films with plasmonic nanoparticles

Output control of a parametrically uncertain linear plant with unaccounted dynamics and disturbances

Adaptive estimation of nonstationary parameters using internal model method

Conditional generation of high-resolution images with limited computing resources and training data

Generative neural network structures for optimizing communication channels and determining the optimal probing impact on physical systems

Analysis of the cooling system with a double-action solar collector energy efficiency for Mali climate

Comprehensive analysis and evaluation of the efficiency of heat pumps for simultaneous production of heat and cold

Interaction of laser light with hybrid hierarchical structures

Human personality-driven multi-view learning for user profiling and content recommendation applications

Discrete optimization based on the algorithms ensemble

Research and development of acoustic emission signal processing methods

Exceptional points in high-Q resonators with Kerr nonlinearity

Optical and magnetic properties control of one- dimensional carbon nanomaterials

Predictive modeling of processes in complex networks using machine learning methods based on incomplete data

Development of a method for monitoring a composite telescope mirror

Extracting and applicatiing knowledge from special data to improve quality of predictive models for tasks of expert decision support

Evolutionary optimization methods for automatic hyperparameters search for models based on additive regularization

Development of visual programming tools for machine learning models based on a bipartite graph representation of pipelines

Methods for Fixed-Target Runtime Analysis of Evolutionary Algorithms

Optical resonances in dielectric photonic structures

The interaction of laser irradiation with tunable metal-organic frameworks: Structural modification and non-linear optical emission

The influence of dehydration of biological tissues on the change in their optical properties in the terahertz frequency range

The application of swarm intelligence in the field of the correction of the fiber-optic gyroscope signal error caused by heat impact based on the statistical analysis of temperature spatial gradient in the fiber-optic coil

The development of the aberration-based design method for the collimating and concentrating optical systems working with LED for optoelectronic devices

Automatic speech signals quality estimation for voice biometrics and antispoofing systems

A method of graphical clustering for joint analysis of genotyping and expression data

Automated control of artificial lighting in work organization systems for computer system users

Research and development of control system for Magnus effect-based wind turbine

Adaptive output control with compensation of external disturbances having nonlinear parametrically unknown dynamics

The adaptive learning algorithms for the structure and parameters of a Bayesian network based on mixtures of Gaussian distributions

Adaptive State Observers of Electromechanical Systems Based on New Nonlinear Friction Models

Investigation of the processes of laser microporation and delivery of photodynamic drugs under the nail plate

Development of a technique for acoustic emission control of metal products of additive manufacturing

Effects of laser amplification in two-dimensional disordered arrays of microcavities

Adaptive reactive and proactive hybrid control of manipulation robots

Fiber lightguides for optical devices and special-purpose complexes

Laser-induced microplasma method for the optical elements formation

Synthesis of anisotropic magnetite nanoparticles and their condensation into hierarchically structured materials for biomedical applications

Picosecond Nd:YAG lasers for precision satellite location

Research of multi-view image fusion method for optical-electronic complex for steam turbine blade erosive wear control

Dielectric and plasmonic resonant nanoantennas for the optical generation characteristics' control

Fiber-optic sensors of physical values based on fiber Bragg gratings special structures measuring the power of the reflected optical signal

Optical and spectral-luminescent properties of silver ion-exchange layers of silicate glasses activated by rare-earth ions and halogenides

Features of determining the characteristics of cornea quartz spherical simulators and human gastric tissues ex vivo using terahertz radiation

Magnetite-, gold-, and copper-polysaccharide hybrid systems: Physicochemical properties, colloidal stability, and applications

Intermolecular interactions of oppositely and similarly charged polyelectrolyte complexes in "smart" hybrid systems

Structures of gallium oxide obtained by sol-gel synthesis and bulk growth by from the melt

Features of mechanical and magnetoelastic interaction in Ni-Mn-Ga ferromagnets with shape memory at a frequency of about 100 kHz

Fiber-optical gyroscope accuracy and operating characteristics improvement by using high-frequency modulation and optical emission parameters adjustment

Development of technology for functional frozen semi-finished beef products with probiotic properties for public catering enterprises

Scientific substantiation for using hydrated carrot and beetroot powders in round cracknels production

Development of technology for a drink based on hullless oats enriched with beta-carotene encapsulated in a beta-glucan matrix

Methods for design and decoding of polar codes with large kernels

Enhancement of methods and algorithms of mathematical processing of spectral data in research on biomaterials

Development of a methodology for active thermal testing of composite helicopter blades

Development of an optoelectronic system for visual display of changes in the physiological state of patients with chronic disorders and data transmission via optical wireless communication

Investigation of the influence of binarization and phase distribution in the object space on the imaging properties of computer-generated Fresnel holograms

Improving the management of innovation activities in universities in Vietnam based on development of interaction between universities and business

Laser radiation power control based on the analysis of the IR-signal accompanying the laser destruction of biological tissues

Microstructured fiber-optic elements based on silica glass and nanocrystal materials activated with rare-earth ions

Spectrally tunable laser generation in lead halide perovskite micro- and nanowires

Influence of the External Environment on the Optical Properties of I-III-VI Ternary Quantum Dots

Development and Research of Methods for Schedule Tables Synthesing for Avionics Networks with Time Multiplexing

Development of technology for obtaining low molecular weight chondroitin-collagen hydrolyzate and granulated mineral precipitate from secondary fish raw materials

Development of an express method for grain quality assessment using machine vision and digital image processing

Improvement of parametric convergence in problems of adaptive control of nonlinear plants with violation of matching conditions

Nonlinear optical generation from dielectric nanoparticles and nanostructures

Dielectric resonant structures for the luminescent properties control of nitrogen-vacancy centers in diamond and erbium ions in silicon matrix

Linear and nonlinear optical properties of near-infrared nanostructures and perovskite nanocrystals

Optical properties of J-Aggregates of cyanine dyes formed on nanostructured surfaces

Application of metal-dielectric and metal-semiconductor structures in high resolution refractometers based on surface and localized plasmon resonance

Planar and nanosized Ga(N,P) epitaxial heterostructures on silicon and sapphire: structural and optical properties

Optical spectroscopy of periodic planar structures based on phase change materials

Development of methods for measuring the thermophysical properties of thin and thin-film samples of thermoelectric materials

Biotechnology of low-temperature storage of apples of autumn varieties using gas-selective track membranes

Development of technology for a fermented drink with probiotic properties from buckwheat flour

Investigation of molecular transport of momentum, thermal energy and mass in liquid nutrient media of biotechnological production

Thermal and optical characteristics of InGaAs/GaAs/AlGaAs edge-emitting semiconductor lasers based on coupled waveguides

Formation and properties investigation of III-N quasi-one-dimensional crystals and fabrication of optoelectronic devices based on them

Development of technological solutions for production of chopped semi-finished meat products obtained from raw materials of animal and vegetable origin with predetermined quality characteristics

Analysis of the operation of an energy system based on an absorption bromistolithium refrigerating machine and a combined-cycle gas plant

Synthesis and physicochemical properties of tantalum oxide nanoparticles and aqueous dispersions based on them

Design of hole-transport materials for perovkite solar cells

Dissipative autostructures in optical systems with internal resonances

Transfer of linear and angular momentum to subwavelength scatterers in opto- and acoustomechanics

Physical foundations for creation active regions of high-speed injection vertical-cavity surface-emitting lasers for the 1300-1550 nm telecommunication wavelength range by molecular-beam epitaxy

Track control in conditions of incomplete information about the parameters and state variables of a nonlinear model of a mobile robot movement

Development of authentication model and methods for swarms of unmanned aerial vehicles

Using the biopotential of yeast and new brands of silica gel in the technology of beer’s colloidal stabilization

Symmetry breaking of the effective potential in multipole radio-frequency traps

Non-Hermitian Interference Effects in the Scattering of Light by High-Index Semiconductor Nanoparticles

Anapole states of high-refractive-index structures and their application for wireless power transfer

Optical and Photophysical Properties of Biocompatible Hybrid Structures Based on Tetrapyrrole Compounds and Quantum Dots Passivated with Chitosan

Polyurethane-epoxy composite materials for protective coatings

Development of nanofiber composite materials based on polyvinyl chloride by electrospinning method

Intercalation systems based on graphene and magnetic metals: synthesis, electronic structure and magnetic properties

Methods and algorithms of robust distributed ledgers construction based on multidimensional blockchain

Improving the efficiency of a screw single rotor compressor by optimizing the gaps in its working part

Selection and justification of the multi-seat cabin cooling technology for WBC

Development of ultra-compact optical emission sources based on tunnel contact with localized optical nanoantenna

Modeling and properties investigation of photonic crystal fibers for the middle and far-IR region

A study of French fries cooking process and improvement of the device for assessing color characteristics of deep-frying oil and the finished product

Energy efficiency of air conditioning systems based on radiative cooling

Optimization of heat transfer processes in rotary regenerative heat exchangers of air conditioning systems

Laser thermochemical recording on thin metal films with high resolution

Energy-efficient of cold energy conversion systems for cryoproducts

Face images synthesis based on generative machine learning methods with an application to face recognition

Efficient refrigeration systems leveraging the potential of night radiative cooling

Development of wavefront compensators based on freeform surfaces for testing of aspherical mirrors

Methods for preparing coupled states of Bose-Einstein condensate solitons

Optoelectronic multi-matrix system for measuring the displacements of the multisectional mirrors' elements of radio telescopes

Research of a multichannel optical-electronic system for providing the separation of complex-shape fruits

Structure related optical switching in photochromic free metal-organic frameworks

Synthesis and physicochemical laws of the formation of materials based on scleroproteins and polysaccharides

Laser scanning system and methods of image processing of scanning fields for monitoring laser induced damage threshold of optical elements

Temperature detection delay effect on the sagnac phase drift compensation in a fiber optic gyroscope

Modification of the probability of spontaneous emission in plasmonic, organic and semiconductor nanostructures

Increasing 1.55 mkm single-mode vertical-cavity surface-emitting laser frequency stability by an additional polarization-sensitive external cavity based on fiber Bragg grating

Methods for reducing of vibroacoustic noises in fiber-optic interferometric hydroacoustic transducers

Intelligent decision support for the pollinosis prevention based on automatic recognition of pollen images

Method and models for individual tourist routes management based on deep neural networks

Fabrication and study of the hybrid metal-dielectric nanostructures with the organic light-emitting layers

Tracking control algorithms for nonlinear systems with adaptive observing of reference parameters

A method for structuring integrated medical data for medical risks modeling

Improving the efficiency of air conditioning systems based on storage of low temperature energy

Rationale for the use of a vapor compression heat pump in various climatic conditions

Adaptive observers of linear time-varying systems with unmeasured disturbances

Optical traps based on laser diodes

Influence of chromatic dispersion and nonlinear effects on the subcarrier wave quantum key distribution in an optical transport network

Optical vortices in twisted and acousto-optic fiber gratings

Models and methods of data processing in the Internet of Things network for predictive maintenance of a distributed automated environmental monitoring system

Methods for restoring optical parameters of a scene to solve the problem of realistic rendering in mixed reality systems

A Meta Mining Ontology Framework for Data Processing

Development of a method for increasing the depth of field of images reconstructed from computer-generated Fresnel holograms

Development and research of high-power pulsed fiber lasers based on active double-clad fibers with variable core diameter

Development of  compact high-speed high-resolution systems for Earth remote sensing equipment

Architecture and organization of edge computing for a virtual cluster based on computers with constrained computing resources

Optical resonances in nanostructures for modification of radiative recombination in halide perovskites

Spectral-luminescent properties of orthorhombic and monoclinic tungstate and molybdate crystals doped with europium, terbium, thulium, and ytterbium

Biotechnology of obtaining bacteriocins of probiotic strains of Lactobacillus helveticus and Lactobacillus plantarum species

The research of functional and technological properties of resveratrol and its application for food products enrichment

Increasing the efficiency of screw grinding and cutting equipment by improving design and technological parameters

Investigation of the role of accumulated heat under multipulse action of nano-, pico-, and femtosecond laser pulses on condensed media and biological tissues

Research and Development of Modular Technological Equipment for Job and Small-­batch production

Development of automated technology for the manufacture of deployable elements from thermoplastic polymer composite

Development of edible polysaccharide-protein based antimicrobial gel coating for food products

Development of organic calcium salts technology from secondary raw materials of hydrobionts for enrichment of food products

Development of technologies for production and use of glutathione-enriched baking improver from residual brewer's yeast

Automatic Recognition of Speaker’s Emotional States Based on Audio and Text

Methods and protocols providing reliability and timeliness of transmissions on the basis of packet replication at the transport layer of computer networks

Energy-efficient air conditioning processes based on a statistical outdoor climate model

Method development for non-destructive testing of organic origin composite materials physicochemical characteristics

Development of design and study of properties of photonic structures to improve the efficiency of exciton-photon and magnon-photon interactions

Higher-order topological and entangled states of photon pairs in resonant nanostructures

Improvement of the working bodies of the screw single-rotor compressor

Resonant semiconductor nanostructures for efficiency enhancement of perovskite solar cells

Development of a system for monitoring and neutralization of exhaust gases of internal combustion engines at their tuning, running-in and adjustments sites

Development of algorithmic software and hardware for primary signal processing in dynamic indentation

Models, algorithms and methodology for design of microcontroller-based physical security systems protected from cyber-physical attacks

Control of exciton and polariton optical resonances in planar structures integrated with two-dimensional semiconductors

The development of enzyme-linked immosorbent test system for conrolling gluten content in food

Biotechnology of yoghurt for functional nutrition in the Far North

Molecular dynamics modeling of linear and branched peptide polyelectrolytes

Investigation of the optical and plasmonic properties of hybrid structures based on carbon films and metal nanoparticles

Fabrication of hyaluronic acid-based fibrous materials by electrospinning technique

Quantum metrology based on detecting entangled states of tunnel-coupled bright solitons

Recombination processes in mid-infrared light-emitting diode structures

Development of technologies for obtaining and using a protein-bearing food ingredient from the сattle peripheral dehaired skins and split hides

Optical forces in the field of evanescent waves at the flat interfaces

Development of the composition and technology of a fermented product with oncoprotective properties

The development of technology for a functional beverage of adaptogenic action to restore the body after alcohol intoxication

Thermal stabilization of electronic devices with intensive heat emissions

Optoelectronic system for monitoring the position of the railway track during its alignment

Method of adaptive observers design for time-varying systems with polynomial parameters

Optical and photoelectric properties of nanostructures based on semiconductor nanocrystals and graphene derivatives for near-IR photonics

Investigation of the energy structure of carbon nanoparticles in solutions and solid-state matrices

The method of diagrammatic verification of ontologies is based on ALC description logic

Formation and analysis of objects microstructure images in line-field swept source optical coherence tomography

Optico-electronic device for forming dynamic visual image for light therapy

Evolution of optical vortices in the diffracted field

Algorithms for speech acquisition of a target speaker using planar compact microphone arrays

Model and methodology for quantitative assessment of the usability of systems of protection to information from unauthorized access in automated systems of internal affairs agencies

Method and algorithms for detecting attacks and protecting publisher-subscriber networks based on machine learning and metadata injection into messages

Coherent detection in quantum information systems based on multimode phase-modulated light

Development of Ellipsoid-based Methods for Simultaneous Rejection of External Disturbances and Measurement Noises

Scattering pattern configuration of nanostructures with high-order multipole moments

Electromagnetic near-field control in resonant gold-silicon nanostructures

Research of thermophysical properties of fruits of Southeast Asia

Adaptive output control for linear time-varying systems

Terahertz coherent spectroscopy and near-field microscopy of semiconductors and semiconductor structures

Nonlinear topological effects in semiconductor optical microcavities

Development and research of algorithms for eliminating visual redundancy based on transform coding

Investigation of the process of electric resistance heating in the production of bread and improvement of the apparatus for its implementation

Model and methodology for detecting low-intensity distributed denial-of-service attacks in infotelecommunication systems

A3B5 semiconductor heterostructures, fabricated by molecular beam epitaxy and wafer fusion techniques, and 1300 – 1550 nm spectral range lasers based on them

Models and Methods for Automatic Recognition of Russian Sign Language Elements for Human-Machine Interaction

Simulation and creation of interference nonpolarizing coatings

Microwave photonics components with impedance matchimg circuits for data transmission systems

Investigation of vacuum-evaporative crystallization processes in the production of ice slurry

Features of the propagation of electromagnetic waves in artificial resonant media based on graphene in the terahertz frequency range

Tailoring light emission and scattering with plasmonic nanostructures

Method of graph analysis of transcriptome data for detecting metabolic regulation of immune cells

Generation of datasets for a classification task with given characteristics to improve the quality of meta-learning systems

Research and development of recommender systems algorithms based on information models of user experience dynamics in service networks

Optimization of technical solutions for air conditioning systems in public buildings

Transformation of chromone based organic compounds under single-photon and multiphoton laser excitation

Design of circular radiation optical systems for transport communication purposes

Methods and tools for laser control of local colorimetric characteristics of titanium surface

Dispersion and polarization peculiarities of surface electromagnetic waves on resonant anisotropic metasurfaces

Nonlinear phenomena in liquids in the field of broadband radiation of the infrared and terahertz spectral ranges

FUNDAMENTAL EQUATION OF STATE FOR REFRIGERANT R1234YF IN SCALE OF THEORY OF THE CRITICAL POINT

Methods and means of the analysis of programs and software systems source code based on semantic models

Multiscale modeling and forecasting of information processes in digital social systems

Generation of function block programs for industrial cyber-physical systems using evolutionary algorithms

Cognitive methods for corporate structures mining to support digital transformation of exploration and production workflows

Effects of hysteresis, refractoriness and monopulse generation in semiconductor quantum dot lasers subject to optical injection

Methods and algorithms for the effective visualization of the 3D scene models on multiprocessor workstations

Influence of photoactinic radiation on the properties of molecular co-crystals of the aminopyridine series

Suppression of photo- and electro-induced phase instability in lead-halide perovskites for the development of light-emitting devices

Methods and means for program equivalent transformation based on portable runtime environment

Methods and algorithms for processing multimodal medical data based on transfer learning in clinical decision support systems

Educational trajectories management in higher education based on intellectual analysis of labor market needs

Architecture and computational methods for distributed convolutional neural network on a resource-constrained computer cluster

The polarization cross-coupling influence on the Sagnac phase shift in a fiber-optic gyroscope

Development of a Raman gas analyzer for isotopologues of carbon-containing compounds with ultraspectral resolution

Methods for Generalization and Performance Improvement for the Bi-Phase Genetic Algorithm with Crossover that Compensates Effects of Mutations

Algorithms of direct adaptive tracking of multi-sinusoidal reference signals in time-delay systems

Enhanced and heat-sensitive Raman scattering spectroscopy of optically resonant semiconductor nanoparticles

Temporal dynamics and spectral properties of individual quantum emitters and their ensembles in the vicinity of nanophotonic interfaces with account for chiral interactions

Development of composition and technology of low-lactose frozen lean dessert on goat milk

Biotechnology of the national fermented dairy drink based on camel milk

Development of phytase biotechnology using the Aspergillus niger strain

Contextual Time-Continuous Emotion Recognition based on Multimodal Data

Methods and Algorithms of Firmware Security Assessment Based on the Fuzzy Logic

Design of model reference adaptive control for linear systems based on adaptation algorithms with improved convergence

Modification of semiconductor structures and semiconductor lasers characteristics by direct ion-beam lithography

Security methods and algorithms against distributed «denial of service» attacks

Search space reduction techniques for deterministic finite automata inference with Boolean satisfiability problem solving

Increasing efficiency of evaporators of refrigeration machines with in-channel boiling of refrigerants

Modeling of heat and mass transfer and filtration processes in an adiabatic humidifier

Construction of Polar Subcodes and Their Simplified Encoding and Decoding

Development of a wireless optoelectronic system for simplex information messages transmission using LEDs

Fiber-optic devices for biological micro-objects research and flexible medical instrument 3D shape control

Optical properties of low-atom metal clusters and plasmonic nanoparticles in thin dielectric films

Investigation of photonic topological insulators based on dielectric structures in microwave frequency range

Development of methods and tools for secure data collection of Internet of Things (IoT) environments

Improving the efficiency of optoelectronic systems mechatronic piezoelectric modules

Formation features of holographic structures in materials with diffusion-based recording mechanisms

Development of the Apparatus and Evaluation of Rational Process Conditions for Extrusion Processing of Secondary Raw Materials for Food Purposes

Developing biotechnology of beta-glucan-containing concentrate from residual brewer's yeast

Laser writing of waveguides in porous glass for sensors applications

Optimization of the spatial light distribution of optical systems for fractional and photodynamic therapy

Photochemically induced circular dichroism of semiconductor nanocrystals

Luminescent and photoelectric properties of hybrid structures based on nanostructured carbon and quantum semiconductor nanocrystals

Complex of processing algorithms aircraft flight data in the crew information support system

Fabrication of photonic structures by direct laser writing and their spectroscopic investigation

Examination of the properties of epitaxial films and bulk crystals of gallium nitride and oxide for the creation of power electronics devices

The research of methods for improving the accuracy parameters of a fiber-optical hydroacoustic towing streamer for marine geophysical surveys

Research of the coded aperture and optical-electronic system for optical and ionizing radiation sources imaging

Intellectual technology for organizing the execution of heterogeneous composite applications in a global distributed computing environment

Increasing efficiency of air regeneration system for enclosed spaces

Polyurethane coatings based on nanocomposites with allotropic modifications of carbon

Obtaining of edible films and coatings based on a starch/gelatin biopolymer matrix

Development of film composite materials based on polyvinyl chloride and polyhydroxybutyrate

Audio-visual Russian speech recognition

Procedure for selection of effective design and technological solutions for cryogenic refrigeration system of superconducting cable lines

Energy efficiency analysis of active type exhaust air heat recovery systems

Robust Speech Recognition for Low-Resource Languages

An iterative method of the adaptive observers design for nonlinear systems

Theoretical and experimental study of the volumetric instability effects in gallium nitride nanowires

Interference and diffraction methods of parameters control for pulsed terahertz radiation

Analysis of effectiveness of refrigerating systems with radiative cooling depending on climatic conditions

Methods and technologies for metocean models' local dynamic tuning based on observation data in presence of uncertainty

Nonlinear absorption and refraction in the field of ultrashort pulses in crystalline and liquid materials for detection and generation systems of terahertz radiation

The method and algorithms for detection of the heart rate from a speech signal without prior information about a speaker

Methods and algorithms of barcoding for facial biometrics

Optoelectronic methods of an integrated assessment of luminance distribution in an urban environment

The study of heat transfer in a device for general cryotherapy exposure

Thermophysical processes within spark plasma sintering of nanostructured thermoelectric materials

Heat Transfer Investigation into the Flow around Tubes with Circular Fins using Gradient Heatmetry and Temperature Measurement

Isolation and identification of the strain of wine yeast Hanseniaspora opuntiae MK 460485 and research of its application in the production of ethanol

Improving the process and equipment to ensure high stability of food emulsions

The application of ultradisperse humic-sapropel suspensions in the technology of ethyl alcohol from barley

Creation of interference coatings with high stability to the deviation in layers parameters

Optical properties of weakly absorbing nanoparticles with high refractive index, enabled by toroidal multipole moments

Wheat kvass technology using a combination of yeast and lactic acid bacteria

Resonant interaction of quas-linear waves with solitons in nonlinear optical fibers

Improving the design and calculation methods of piston expanders

3D nonlinear quasi-phase matching structures: theoretical analysis, material synthesis and study of polymer-based fabrication technique

Single-frequency arched quantum-cascade laser in the range of 7-8 mkm based on heterostructures fabricated by molecular beam epitaxy

Laser light unit development for additive manufacturing based on continuous wave mode laser diodes

Method and algorithms for constructing an intelligent dialog system based on the dynamic representation of knowledge graphs

The method of data models complex evaluation for automated unsupervised machine learning

Efficient Incremental and Asynchronous Non-Dominated Sorting for Evolutionary Multiobjective Algorithms

Output adaptive and robust control with sampled data under external disturbances

Development of adaptive manipulation and energy-efficient locomotion robots

Methods and algorithms of cloud systems automatic scaling under nonstationary workload

Mathematical apparatus for the collaborative processes management in the travel industry based on social media data

Techniques of identification and analysis of mathematical models for synthesis of digital control systems of precision electric drives

Methods, models and software for text documents representation using quantum probability theory

Digital holographic registration, processing and analysis of wave fields in visible and terahertz frequency ranges

Security of subcarrier-wave quantum key distribution systems against hacking of measurement device

Picosecond Nd:YAG Laser for the Lunar Laser Ranging

Complexity analysis of optimization search algorithms using variation operators with a limited number of arguments

Automatic evaluation and tuning system for clustering algorithms

Development of the physical method for investigation of ultrafast electronic processes at femtosecond laser modification of silicon surface for application in quantum electronics devices

Pulsed 946 nm Nd: YAG laser

Methods of intellectual support for clinical decision making on the basis of finite automation

Nanosized structures for terahertz radiation generation, detection and modulation enhancement

Investigation of the behavior of lysine dendrimers in solution by the molecular dynamics method

Method and algorithms of ontology learning based on metadata and context analysis of unstructured content

Stokes polarimeter based on a two-beam scheme for astronomical instrumentation

Method and algorithms for incomplete users' utterances understanding for IoT devices control, using ontology modeling

Optical waves in non-Hermitian systems with antilinear symmetries

Metaphotonics with resonant dielectric structures

Development of water-retaining composites based on mineral-modified acrylic hydrogels

Study of the structural-luminescent properties of synthetic micro- and nanodiamonds by Raman and luminescent spectroscopy

Circular dichroism of chiral semiconductor nanostructures with helical symmetry

Automated Lipreading with LipsID Features

Heterogeneous Face Recognition from Facial Sketches

Synthesis and investigation of acrylic hydrogel sorbents to increase soil productivity

Geometric parameters of C-band passive mode-locked laser diodes

Optoelectronic system with selective invariance to control the deflection of floating docks

New methods for characteristics control of integrated optical modulators on a lithium niobate substrate for signal processing in high-precision optical measurement systems

Speech synthesis based on deep machine learning

Unambiguous discrimination of phase-modulated states in communication by optical channels

Methods and algorithms for detecting objects based on a neural network with a fully connected convolution kernel

Estimation of quasi-deterministic processes with allowance for their value and derivative constraints in satellite navigation

Optical bound states in the continuum in one- and two-dimensional photonic structures

Methods for detecting and counteracting the automated collection of information from web resources

Security improving methods of combined authentication schemes

Control of Nonlinear and Multi Input Multi Output Systems Based on Backsteppingping and Auxiliary Loop Techniques

Optical dielectric nanoantennas based on nanodiamonds with nitrogenvacancy color centers

Excitation of coupled modes of elements of periodic structures in the microwave range

Investigation of wireless power transfer systems based on dielectric resonators and metasurface

Методы и средства автоматизированного синтеза вычислителей на основе микроархитектурных программируемых генераторов аппаратуры

Автоматизация процессов тестирования и отладки встраиваемых систем с использованием уровневых моделей

Адаптивные методы и технологии контроля качества гидрометеорологической информации на основе гибридных данных